Pulsarlube MS&MSP
De Pulsarlube MS & MSP units zorgen voor automatische smering van machines die onregelmatig worden gebruikt. Dit doen ze door synchroon te werken met de apparatuur, zodat oversmering wordt voorkomen.
Synchronized
Dispenses a preset amount of lubricant only when equipment is in operation.
LCD
Easy to program with built-in LCD and simple button controls.
60bar
Up to 8 lube points for multi-point / Max. 10m (33ft) for single point.
Service Pack
Substantial savings from the use of replaceable grease pouches and battery packs.
Pulsarlube MS&MSP
Series 60, 125, 250, 500De automatische elektromechanische vetsmeerunit Pulsarlube MS is ontworpen om synchroon te werken met de apparatuur waarop deze is geïnstalleerd. Zolang de apparatuur in werking is, zal de Pulsarlube MS de vooraf ingestelde hoeveelheid smeermiddel afgeven, zodat verlies of verspilling van smeermiddel kan worden voorkomen. Als de apparatuur niet in werking is, gaat de Pulsarlube MS in de 'standby-modus' en wordt er geen smeermiddel afgegeven totdat de machine weer in werking treedt.
De automatische elektromechanische vetsmeerunit Pulsarlube MSP is ontworpen om synchroon te werken met de apparatuur waarop deze is geïnstalleerd. Zolang de apparatuur in werking is, zal de Pulsarlube MSP de vooraf ingestelde hoeveelheid smeermiddel afgeven, zodat verlies of verspilling van smeermiddel kan worden voorkomen. In tegenstelling tot de Pulsarlube MS is dit product een machinaal gesynchroniseerde, extern aangedreven unit die gevoed wordt door een op de machine aangesloten voeding of PLC. Het batterijpakket in de unit hoeft pas na circa 5 jaar te worden vervangen. De vetvulling moet echter worden vervangen na voltooiing van elke smeercyclusset.
Product dimensies
- MS&MSP60: Ø91mm(3.60") x 181mm(7.13") (H)
- M125: Ø91mm(3.60") x 181mm(7.13") (H)
- M250: Ø91mm(3.60") x 210mm(8.27") (H)
- M500: Ø92mm(3.62") x 260mm(10.23") (H)
Technische specificaties
| Specificatie | Waarde |
|---|---|
| Grease Pouch Capacity | 60ml/125ml/250ml/500ml (replaceable) |
| Power Supply | MS : DC 4.5V Battery Pack MSP : External Power Supply |
| Operating Pressure | 30~60bar (435~870psi) |
| Operating Temperature |
Standard Alkaline Battery : Optional Lithium Battery : |
| Dispensing Periods |
60ml : 1~12 month |
| Remote Installation | Max. 10m (33ft) with O.D. Ø6 tube |
| Multi-Point Installation | Max. 6m (20ft) with O.D. Ø6 tube (Up to 8 lube points) |
| Packaging | 10 Units/Case |
Productcertificaten
| Certificaat | Waarde |
|---|---|
| N/A | N/A |
MSP Relay / MSP Power Supply Specification
| Product | Value | Voltage Rate Input Range | Voltage Rate Output Range | Power ON Indicator | Relay Box Dimensions | Wire Length |
|---|---|---|---|---|---|---|
| MS | Relay | AC100-480V, 0.5W/50~60Hz | Signal (Open collector type) | Red LED | 85mm (D) x 49mm (W) x 32mm (H) | Input 1m (3ft) / Output 4m (13ft) |
| MSP | VAC | AC Adaptor (100~220V) | 5.0V, 2A | Red LED | 85mm (D) x 49mm (W) x 32mm (H) | Input 1m (3ft) / Output 4m (13ft) |
| MSP | VDC | DC-DC Convertor (12~24V) | 5.0V, 2A | Red LED | 85mm (D) x 49mm (W) x 32mm (H) | Input 1m (3ft) / Output 4m (13ft) |
Reducer, 3/8"F X 1/4"M Adaptor (Brass)
Part No.: A001
Reducer, 3/8"F x 1/8"M Adaptor (Steel)
Part No.: A002-S
Reducer, 3/8"F x 1/8"M Adaptor (Brass)
Part No.: A002
Socket, 1/4
Part No.: A011
Socket, 1/8
Part No.: A012
90° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
Part No.: A019
90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
Part No.: A020
90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
Part No.: A021
90° Elbow, 1/8”M X1/8”F Adaptor (Brass)
Part No.: A022
45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
Part No.: A023
45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
Part No.: A024
Pipe, 1/8
Part No.: A106
Pipe, 1/8
Part No.: A107
Pipe, 1/8
Part No.: A108
Pipe, 1/8
A109
Pipe,1/4”M X 1/4”M × 50mm (Steel)
A121
Pipe,1/4”M X 1/4”M × 100mm (Steel)
Part No.: A122
Pipe,1/4”M X 1/4”M × 150mm (Steel)
Part No.: A123
Pipe,1/4”M X 1/4”M × 200mm (Steel)
Part No.: A124
Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A212-1
Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A214-1
Tube Fitting, Push-In Type, PC6-PT1/8”M
A240
Mounting Bracket,
Part No.: B002
Self Drilling Screw, #8 x 20
Part No.: B051
Washer
Part No.: B057
Tooth Washer
Part No.: B058
Thread Converter, PT1/8
Part No.: A243
HU-2RS, Grease Type, 2 Ports HU-3RS, Grease Type, 3 Ports HU-4RS, Grease Type, 4 Ports HU-5RS, Grease Type, 5 Ports HU-6RS, Grease Type, 6 Ports HU-7RS, Grease Type, 7 Ports HU-8RS, Grease Type, 8 Ports
HU Type Divider Block
Toepassingen
Semiconductors & Machine Tool
- Web Scrubbers
- Air Handing Units
- Clean Rooms
- Cooling Towers
- SMD PLB Lines
- LCD Panels
- Loader Robots
Installaties
Socket + Pipe + Reducer
| Type | Waarde |
|---|---|
| A011 | Socket, 1/4"F x 1/4"F Adaptor (Brass) |
| A012 | Socket, 1/8"F x 1/8"F Adaptor (Brass) |
| Type | Waarde |
|---|---|
| A121 | Pipe,1/4”M X 1/4”M × 50mm (Steel) |
| A122 | Pipe,1/4”M X 1/4”M × 100mm (Steel) |
| A123 | Pipe,1/4”M X 1/4”M × 150mm (Steel) |
| A124 | Pipe,1/4”M X 1/4”M × 200mm (Steel) |
| Type | Waarde |
|---|---|
| A106 | Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel) |
| A107 | Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel) |
| A108 | Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel) |
| A109 | Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel) |
Reducer
| Type | Waarde |
|---|---|
| A001 | Reducer, 3/8"F X 1/4"M Adaptor (Brass) |
| A002 | Reducer, 3/8"F X 1/8"M Adaptor (Brass) |
| A002-S | Reducer, 3/8"F X 1/8"M Adaptor (Brass) |
| Type | Waarde |
|---|---|
| A023 | 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass) |
| A024 | 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass) |
90˚ Elbow
| Type | Waarde |
|---|---|
| A019 | 90° Elbow, 1/4”F X 1/4”F Adaptor (Brass) |
| A020 | 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass) |
| A021 | 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass) |
| A022 | 90° Elbow, 1/8”M X1/8”F Adaptor (Brass) |
Single point remote installation
Kit No. 1250RC-1
| Type | Waarde |
|---|---|
| A002 | Reducer, 3/8"F X 1/8"M Adaptor (Brass) |
| B002 | Mounting Bracket, “L”Shape |
| B051 | Self Drilling Screw, #8ⅹ20 |
| B057 | Washer |
| A012 | Socket, 1/8”F x 1/8”F Adaptor (Brass) |
| A240 | Tube Fitting, Push-In Type, PC8-PT1/8"M |
| A214-1 | Distribution Tubing, O.D. 5/16"(8mm). Urethan Tubing, 3ft Pre-filled with (Grease Type) |
| A243 | Thread Converter, PT1/8"F X NPT1/8"M (Brass) |
Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.
Multi-Point installation
Electromechanical Products using a divider block ( up to 8 points )
| Type | Waarde | Hoeveelheid |
|---|---|---|
| A002 | Reducer, 3/8"F X 1/8"M Adaptor (Brass) | 1 |
| B002 | Mounting Bracket, “L”Shape | 1 |
| B051 | Self Drilling Screw, #8ⅹ20 | 1 |
| HU-2RS ~ HU-8RS | HU Type Divider Block, Grease Type, 2 Ports ~ 8 Ports | 1 |
| B058 | Tooth Washer | 2 |
| A240 | Tube Fitting, Push-In Type, PC6-PT1/8”M | 3 |
| A214-1 | Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type) | 1 |
| A243 | Thread Converter, PT1/8"F X NPT1/8"M (Brass) | 1 |
© Copyright Ambi Smeersystemen 2021 Powered by iClicks
Comments